FluidPRO equipment from MAHLE Service Solutions offers a range of choices in fluid exchange equipment. The ATX+Boost offers technicians fully-automatic operation with precise fluid measurement to maximize efficiency. The added feature of the high output boost pump yields faster service times of 2 to 5 minutes. Features of the ATX+Boost: ëDipstickí or ëCoolerí mode selector, start engine indicator (on ATX-3 only) Electronic diode illuminated keypad ñ fluid flow direction indicator verifies correct hook-up Transmission diagnostic pressure gauge New and used fluid sight glasses Automatic fluid level adjustment +/- Ω quarts Digital weight scale technology for accurate fluid exchange Patented bypass circuit for vehicle protection Adapters: Cooler line connection. Valved couplers for minimum spill. Standard adapters for Ford, GM, Chrysler, & Universal (most Asian). Controls: Microprocessor with digital keypad & light emitting diodes Dimensions (H x W x D): 45 in x 28 in x 26.5 in (112 cm x 70 cm x 67 cm) Fluid Tanks / Types: 26 quarts (24.6 liters) each for both new & used fluids / Multiple fluid capability Hoses: 10 ft. (3 m) black & red (exchange); 8 ft. (2.5 m) black (empty used tank) New Fluid Pump: Positive displacement gear pump, 4 quarts (3.8 liters) per minute/includes diaphragm pump, 7.2 quarts (6.84 liters) per min. Diaphragm pump increases fluid suction rate in low-flow/temperature controlled transmission in both ATX-2+Boost units. Operating Range Cooler Mode: 32∞ to 122∞F (0∞ to 50∞C) Dipstick Mode: 42∞ to 122∞F (5.5∞ to 50∞C) Power Source: 12 VDC – 10 Amp Process Time: 3 to 6 minutes average full exchange. Scale Accuracy: ±0.03% over usable range Warranty: 1 Yearñparts & labor Weight: ATX-2+Boost: 242 lbs. (110 kg) ATX 2+Boost PS Combo Power Steering Transmission Unit (PSX-3 mounted on back of ATX 2 machine)