Slide hammer type puller removes dowel pins from cylinder heads, blocks, crankshafts, flywheels, etc. Fast and easy. Simply mount the correct size collet on the shaft, place over the dowel pin, use a downward motion with the sliding weight to lock the collet and an upward motion to pull the dowel.
Dowel Puller Kit – Metric
$551.24
Description
Slide hammer type puller removes dowel pins from cylinder heads, blocks, crankshafts, flywheels, etc. Fast and easy. Simply mount the correct size collet on the shaft, place over the dowel pin, use a downward motion with the sliding weight to lock the collet and an upward motion to pull the dowel. To release the collet, insert into the release stand and tap downward on the shaft end with a small hammer.
NOTE: Collets and Mandrel are equipped with 1/2 – 20 threads.
- KL1575A – Sliding Weight, Qty 1
- KL1575B – Collet Closer, Qty 1
- KL1575C – Release Stand, Qty 1
- KL1590 – 4mm (.158) Dowel Puller Collet, Qty 1
- KL1591 – 5mm (.197) Dowel Puller Collet, Qty 1
- KL1592 – 6mm (.236) Dowel Puller Collet, Qty 1
- KL1594 – 8mm (.315) Dowel Puller Collet, Qty 1
Replacement and Optional Collets
- KL1576 – 3/16″, KL1581 – 1/2″, KL1583 – 11/16″, KL1591 – 5mm
- KL1577 – 1/4″, KL1586 – 9/16″, KL1589 – .735, KL1592 – 6mm
- KL1578 – 5/16″, KL1587 – 5/8″, KL1584 – 3/4″, KL1594 – 8mm
- KL1579 – 3/8″, KL1582 – .640, KL1585 – .800, KL1595 – 10mm
- KL1580 – 7/16″, KL1588 – .675, KL1590 – 4mm, KL1596 – 12mm
Additional information
Weight | 17 lbs |
---|
You must be logged in to post a review.
Reviews
There are no reviews yet.