Fuel and Hydraulic Oil Tank Sweeper® Polishing and Filtration System (Mobile)

$4,095.95

Filter, polish, purify, transfer and remove water and contaminants from diesel fuel, fuel oil, hydraulic oil, motor oil and kerosene systems

Description

A Complete Polishing, Transferring and Filtration System

The Fuel and Hydraulic Oil Tank Sweeper® is a mobile, turnkey solution for cleaning, transferring and filtering water and contaminants from fuel and hydraulic oil systems. Specifically designed for servicing fleet, marine, construction and agricultural equipment, the Fuel and Hydraulic Oil Tank Sweeper® removes debris, impurities, sludge, and standing or emulsified water from contaminated diesel fuel, fuel oil, hydraulic oil, motor oil, and kerosene. Additionally, use it as a preventative maintenance or service tool to extend the life of diesel fuel system components. The fully mobile unit is built with a spill-free design for a clean and complete evacuation of all fluid from machine parts, hoses, and filters. It can be used for hydraulic transmission and similar viscosity oils (with appropriate filters), as well.

Features

  • Filter, polish, purify, decontaminate and transfer fuel and hydraulic oil on a fully mobile cart
  • Innovative filter technology shows filter status and allows filter bypass for bulk transfer
  • Works with small, portable air compressors as low as 4 cfm @ 22-102 psi
  • Easily switch between fluids with drain-down design and integrated drip pan
  • Closed-circuit hoses feature quick-disconnect fittings, allowing simple connectivity between various adapters and additional hoses
  • Gives complete control over transfer rate and access to hard-to-reach areas
  • Custom, detachable flow-through brush
  • Ability to transfer multiple types of fluids with one unit
  • NOT FOR USE WITH gasoline or other highly volatile fluids

Includes:

• (2) 30-Micron Particulate Filters (#FIL00003) • (2) 10-Micron Water-Blocking Filters (#FIL00010) • (1) 17-Micron Water Blocking Filter (#FIL00001A) • (1) 178-Micron Wire Mesh Filter (#FIL00002A) • 12′ Input Hose (#9046-INHOSE-AS) • 12′ Output Hose (#9046OUTHOSE-AS) • Quick-Disconnect Ball Valve (#9046-VALVE-AS) • Quick-Disconnect Right Angle (#9046-90DEG-AS) • Quick-Disconnect Adapter Hose (#9046-HSADPTR-AS) • 5′ 1″ Dia. Rigid Wand (#9046-INPUT-AS) • 5′ 3/4″ Dia Flex Wand (#9046-OUTPUT-AS) • 5′ 1/2″ Dia. Flex Wand (#9046-OUTPUT2-AS) • 5′ 3/4″ Dia. Flex Wand with Flow-Through Brush (#9046-BRWAND-AS) • Chassis Ground Cable (#7900K-2BCHAS) • Filter Wrench (#FIL00005) • Drip Pan (#9046-3)

 

Specifications
Pump Type: Pneumatic Diaphragm
Operating Pressure: 4 cfm @ 22-102 psi
Head-Lift Height: 22′
Unfiltered Flow Rate: Pump rated up to 26 gpm
Intake/Output: 1″ dia.
Primary Filter: 30-Micron Particulate-Blocking or 10-Micron Water-Blocking
Secondary Filter: 17-Micron Water-Blocking
Tires: 10″ Pneumatic Tires
Material: Powder-Coated Steel
Weight: 70 lbs.
Dimensions: 24″ W x 42″ H x 14″ D
Warranty: 2-Year Limited Warranty
CoO: USA

Additional information

Weight 90 lbs

Reviews

There are no reviews yet.

Be the first to review “Fuel and Hydraulic Oil Tank Sweeper® Polishing and Filtration System (Mobile)”

Go to Top