Give us a Call: 616.591.0095
Ask David Give us a Call: 616.591.0095

Nexiq Blue-Link ELD 16-Pin OBDII Bluetooth Device

Home » Shop » Nexiq Blue-Link ELD 16-Pin OBDII Bluetooth Device

Nexiq Blue-Link ELD 16-Pin OBDII Bluetooth Device

SKU: EESM607NX Category: Brand:




  • 1939 Protocol
  • OBD CAN (ISO15765) Protocol
  • Calculated Engine Hours If No ECM Support

General Support

  • Seamless Background OTA Firmware Updates
  • Secure Communications and Firmware Updates
    • Limited access to BLE bondable mode via physical pushbutton on device with built-in timeout.
    • All communications between mobile client and device employ standard BLE encryption.
    • Authentication required between mobile client and device to enable datalink communications, and to enable OTA device firmware update.
    • Encrypted firmware update file.
    • Running firmware locked and encrypted to prevent data extraction.
  • Automatic Vehicle Link Detection for ELD Data of Interest (Engine Controller)
    • CAN auto-baud detection
  • Calculated Odometer Support If No ECM Support
  • Fully-Documented Driver/Device API for Developing Mobile Apps To Communicate with the ELD

Bluetooth Support During Active Connection

  • Device Notification of Powered-On Date and Time
  • Log Record Parameter Support with Selectable Raw Data or Pre-Scaled Format, with the following information
    • GPS position and UTC time data
    • Vehicle Identification Number (VIN)
    • Engine serial number
    • Odometer
    • Engine hours
    • Vehicle speed
  • Log Records Notifications Automatically Occur at 15-Minute Intervals
  • Updated Log Record Can Also Be Requested Immediately by Mobile Client
  • Automatic Notification Of Each Vehicle Motion State Change
    • Key Off
    • Key On (Engine Off)
    • Key On (Engine Running)
  • Automatic Notification of Each Vehicle Motion State Change
    • In-motion event = vehicle exceeds 5mph after being considered motionless
    • Motionless = vehicle motionless for more than 3 seconds after being considered in-motion
  • Automatic Data Capture Timeout Notifications
    • Device checks for more than 5 seconds without one or more required core parameters being received from expected source (ECM or calculated), and sends notification to client application on each occurrence.
    • The following parameters subject to DCT check:
      • Odometer
      • Engine hours
      • Engine speed
      • Vehicle speed
  • Configurable Distance Traveled Notifications
    • Device sends periodic odometer notifications to mobile client for specified distance traveled. Default trigger is 5 miles, configurable via API call.
    • Configurable Hard Driving Detection and Notifications:
    • User-configurable mph/s threshold for device detecting hard acceleration/deceleration events and sending notifications back to mobile client

Bluetooth Support During Vehicle Activity with no Application Connection

  • Log Record on-device archiving, with flag indication of reason for each capture.
  • On subsequent mobile application connection, archived log records can then be retrieved via the following defined API commands:
    • 15-minute periodic capture when engine running
    • Ignition-on (engine running) / Ignition-off events
    • Driving / Not Driving Events
      • Driving = 5mph or greater detected
      • Not Driving = motionless for more than 5 minutes after “Driving” event detected
  • Initial Data Capture Timeout event, i.e., first time any of 4 core parameters not received within 5-second timeout is detected.
  • Data Capture Recovery event, i.e., all four core parameters received within 5-second window after initial Data Capture Timeout event has been previously captured.